APRS Track Direct

My position About ☰

reset

E22KKC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1778036847	12 Pkt	0 Pkt	-49 dBm	3.59 V
1778035021	11 Pkt	0 Pkt	-49 dBm	3.59 V
1778033195	10 Pkt	0 Pkt	-49 dBm	3.59 V
1778031370	7 Pkt	0 Pkt	-51 dBm	3.59 V
1778029545	4 Pkt	0 Pkt	-51 dBm	3.59 V
1778027720	2 Pkt	0 Pkt	-50 dBm	3.59 V
1778025894	10 Pkt	1 Pkt	-50 dBm	3.59 V
1778024069	7 Pkt	0 Pkt	-49 dBm	3.59 V
1778022244	11 Pkt	0 Pkt	-49 dBm	3.59 V
1778020418	7 Pkt	0 Pkt	-49 dBm	3.59 V
1778018593	7 Pkt	0 Pkt	-49 dBm	3.59 V
1778016767	10 Pkt	0 Pkt	-48 dBm	3.59 V
1778014942	7 Pkt	1 Pkt	-49 dBm	3.59 V
1778013117	9 Pkt	1 Pkt	-50 dBm	3.59 V
1778011291	8 Pkt	0 Pkt	-50 dBm	3.59 V
1778009466	6 Pkt	0 Pkt	-49 dBm	3.59 V
1778007641	10 Pkt	0 Pkt	-50 dBm	3.59 V
1778005815	8 Pkt	0 Pkt	-48 dBm	3.59 V
1778003989	11 Pkt	0 Pkt	-49 dBm	3.59 V
1778002164	6 Pkt	1 Pkt	-49 dBm	3.59 V
1778000339	5 Pkt	0 Pkt	-49 dBm	3.59 V
1777998513	10 Pkt	0 Pkt	-49 dBm	3.59 V
1777996688	6 Pkt	0 Pkt	-50 dBm	3.59 V
1777994863	11 Pkt	0 Pkt	-49 dBm	3.59 V
1777993046	6 Pkt	0 Pkt	-49 dBm	3.59 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)