APRS Track Direct

My position About ☰

reset

SR4DOS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR4DOS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	eff*
1754103265	14.03 Volt	570 Pkt	130 Pkt	56 Pcnt	66 Pcnt
1754101464	14.03 Volt	590 Pkt	140 Pkt	58 Pcnt	66 Pcnt
1754099665	14.03 Volt	610 Pkt	150 Pkt	62 Pcnt	66 Pcnt
1754097864	14.03 Volt	600 Pkt	150 Pkt	66 Pcnt	66 Pcnt
1754096064	14.03 Volt	570 Pkt	140 Pkt	70 Pcnt	66 Pcnt
1754094264	14.03 Volt	580 Pkt	140 Pkt	73 Pcnt	66 Pcnt
1754092464	14.03 Volt	560 Pkt	150 Pkt	71 Pcnt	66 Pcnt
1754090664	14.03 Volt	540 Pkt	140 Pkt	71 Pcnt	66 Pcnt
1754088864	14.03 Volt	520 Pkt	130 Pkt	71 Pcnt	66 Pcnt
1754087064	14.03 Volt	510 Pkt	140 Pkt	68 Pcnt	66 Pcnt
1754085264	14.03 Volt	560 Pkt	160 Pkt	66 Pcnt	66 Pcnt
1754083464	14.03 Volt	560 Pkt	140 Pkt	68 Pcnt	66 Pcnt
1754081664	14.03 Volt	560 Pkt	140 Pkt	72 Pcnt	66 Pcnt
1754079864	14.03 Volt	590 Pkt	150 Pkt	69 Pcnt	66 Pcnt
1754078065	14.03 Volt	610 Pkt	170 Pkt	70 Pcnt	66 Pcnt
1754076265	14.03 Volt	620 Pkt	170 Pkt	73 Pcnt	66 Pcnt
1754074464	14.03 Volt	630 Pkt	150 Pkt	71 Pcnt	66 Pcnt
1754072664	14.03 Volt	570 Pkt	140 Pkt	70 Pcnt	66 Pcnt
1754070865	14.03 Volt	640 Pkt	140 Pkt	71 Pcnt	66 Pcnt
1754069065	13.73 Volt	700 Pkt	140 Pkt	74 Pcnt	66 Pcnt
1754067265	14.03 Volt	670 Pkt	150 Pkt	78 Pcnt	66 Pcnt
1754065465	14.03 Volt	700 Pkt	170 Pkt	82 Pcnt	66 Pcnt
1754063665	14.03 Volt	680 Pkt	180 Pkt	85 Pcnt	66 Pcnt
1754061865	14.03 Volt	620 Pkt	160 Pkt	82 Pcnt	66 Pcnt
1754060065	14.03 Volt	680 Pkt	160 Pkt	80 Pcnt	66 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)