APRS Track Direct

My position About ☰

reset

IR5AO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR5AO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff*
1782540166	11.93 Volt	630 Pkt	160 Pkt	93 Pcnt	94 Pcnt
1782539567	11.93 Volt	610 Pkt	160 Pkt	92 Pcnt	93 Pcnt
1782539566	11.93 Volt	610 Pkt	160 Pkt	92 Pcnt	93 Pcnt
1782538967	11.85 Volt	650 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1782538966	11.85 Volt	650 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1782538367	11.46 Volt	660 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1782538366	11.46 Volt	660 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1782537769	11.3 Volt	690 Pkt	180 Pkt	93 Pcnt	93 Pcnt
1782537766	11.3 Volt	690 Pkt	180 Pkt	93 Pcnt	93 Pcnt
1782537169	10.9 Volt	690 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1782537166	10.9 Volt	690 Pkt	170 Pkt	92 Pcnt	93 Pcnt
1782536567	10.74 Volt	700 Pkt	170 Pkt	94 Pcnt	94 Pcnt
1782536566	10.74 Volt	700 Pkt	170 Pkt	94 Pcnt	94 Pcnt
1782535968	10.82 Volt	630 Pkt	150 Pkt	95 Pcnt	95 Pcnt
1782535966	10.82 Volt	630 Pkt	150 Pkt	95 Pcnt	95 Pcnt
1782535366	10.74 Volt	490 Pkt	110 Pkt	96 Pcnt	95 Pcnt
1782534767	10.74 Volt	370 Pkt	80 Pkt	96 Pcnt	96 Pcnt
1782534766	10.74 Volt	370 Pkt	80 Pkt	96 Pcnt	96 Pcnt
1782534169	10.67 Volt	250 Pkt	50 Pkt	96 Pcnt	96 Pcnt
1782534166	10.67 Volt	250 Pkt	50 Pkt	96 Pcnt	96 Pcnt
1782533569	10.74 Volt	120 Pkt	30 Pkt	97 Pcnt	97 Pcnt
1782533566	10.74 Volt	120 Pkt	30 Pkt	97 Pcnt	97 Pcnt
1782533027	10.74 Volt	10 Pkt	0 Pkt	84 Pcnt	92 Pcnt
1782533026	10.74 Volt	10 Pkt	0 Pkt	84 Pcnt	92 Pcnt
1782507169	10.98 Volt	810 Pkt	190 Pkt	91 Pcnt	94 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)