This is the latest recevied telemetry packets stored in our database for station/object JH4KWH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Batt* | Vin* | Rx1h* | Temp* |
|---|---|---|---|---|---|
| 1836274614 | 0.92 A | 0.46 A | 14.54 Volt | 80 Pkt | 93.2 'F |
| 1774121204 | -0 A | -0.35 A | 12.25 Volt | 0 Pkt | 50 'F |
| 1774120304 | -0 A | -0.35 A | 12.25 Volt | 0 Pkt | 50 'F |
| 1774119403 | -0 A | -0.35 A | 12.25 Volt | 0 Pkt | 50 'F |
| 1774118502 | -0 A | -0.35 A | 12.25 Volt | 0 Pkt | 49.1 'F |
| 1774117601 | -0 A | -0.35 A | 12.32 Volt | 0 Pkt | 50 'F |
| 1774116700 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 50 'F |
| 1774115799 | -0 A | -0.35 A | 12.32 Volt | 0 Pkt | 50.9 'F |
| 1774114898 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 50.9 'F |
| 1774113998 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 50.9 'F |
| 1774113097 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 50.9 'F |
| 1774112196 | -0 A | -0.35 A | 12.32 Volt | 0 Pkt | 50.9 'F |
| 1774111295 | -0 A | -0.35 A | 12.32 Volt | 0 Pkt | 50.9 'F |
| 1774110394 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 51.8 'F |
| 1774109493 | -0 A | -0.35 A | 12.32 Volt | 0 Pkt | 51.8 'F |
| 1774108592 | -0 A | -0.35 A | 12.32 Volt | 0 Pkt | 51.8 'F |
| 1774107692 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 51.8 'F |
| 1774106791 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 52.7 'F |
| 1774105890 | -0 A | -0.23 A | 12.32 Volt | 0 Pkt | 52.7 'F |
| 1774104989 | -0 A | -0.35 A | 12.4 Volt | 0 Pkt | 53.6 'F |
| 1774104088 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 53.6 'F |
| 1774103187 | -0 A | -0.35 A | 12.4 Volt | 0 Pkt | 54.5 'F |
| 1774102286 | -0 A | -0.23 A | 12.4 Volt | 0 Pkt | 54.5 'F |
| 1774101385 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 55.4 'F |
| 1774100485 | -0 A | -0.35 A | 12.48 Volt | 0 Pkt | 56.3 'F |
*Used Equation Coefficients:
Solar: 0, 0.1156, -14.6812
Batt: 0, 0.1156, -14.6812
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Temp: 0, 0.9, -83.2
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)