This is the latest recevied telemetry packets stored in our database for station/object DO2HKV-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1768070118 | 976.4 hPa | -8.1 C deg | 67.9 % | 1020.2 hPa | 0 C deg |
| 1768064675 | 974 hPa | -6.5 C deg | 67.7 % | 1017.4 hPa | 0 C deg |
| 1768062863 | 973.4 hPa | -5.6 C deg | 68.1 % | 1016.6 hPa | 0 C deg |
| 1768053785 | 970.2 hPa | -4.2 C deg | 69.4 % | 1013 hPa | 0 C deg |
| 1768051973 | 969.5 hPa | -3.5 C deg | 67.8 % | 1012.1 hPa | 0 C deg |
| 1768048340 | 968.5 hPa | -3.1 C deg | 68.9 % | 1011 hPa | 0 C deg |
| 1768046525 | 968 hPa | -3.8 C deg | 68.2 % | 1010.7 hPa | 0 C deg |
| 1768039264 | 965.9 hPa | -2 C deg | 75.3 % | 1008.1 hPa | 0 C deg |
| 1768017487 | 959.5 hPa | 0.9 C deg | 77 % | 1001.1 hPa | 0 C deg |
| 1768008411 | 958.4 hPa | 1.7 C deg | 76.7 % | 999.7 hPa | 0 C deg |
| 1768002966 | 957.8 hPa | 2.2 C deg | 77.1 % | 999.1 hPa | 0 C deg |
| 1767999337 | 957.5 hPa | 2.2 C deg | 77.2 % | 998.8 hPa | 0 C deg |
| 1767993893 | 957.2 hPa | 2.2 C deg | 76.6 % | 998.5 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)