This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732308632 | 132 | 55 | 31 | 0 | 0 |
| 1732305032 | 128 | 52 | 32 | 0 | 0 |
| 1732301433 | 123 | 52 | 27 | 0 | 0 |
| 1732297832 | 124 | 53 | 33 | 0 | 0 |
| 1732294232 | 124 | 54 | 30 | 0 | 0 |
| 1732290633 | 124 | 55 | 30 | 0 | 0 |
| 1732287032 | 125 | 55 | 35 | 0 | 0 |
| 1732283432 | 125 | 56 | 32 | 0 | 0 |
| 1732279832 | 125 | 56 | 30 | 0 | 0 |
| 1732276233 | 126 | 57 | 33 | 0 | 0 |
| 1732272633 | 126 | 58 | 28 | 0 | 0 |
| 1732269032 | 126 | 60 | 44 | 0 | 0 |
| 1732265432 | 127 | 65 | 42 | 0 | 0 |
| 1732261832 | 128 | 69 | 27 | 0 | 0 |
| 1732258232 | 128 | 69 | 35 | 0 | 0 |
| 1732254632 | 139 | 69 | 35 | 0 | 0 |
| 1732251032 | 140 | 73 | 25 | 0 | 0 |
| 1732247432 | 142 | 71 | 26 | 0 | 0 |
| 1732243832 | 139 | 72 | 33 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)