This is the latest recevied telemetry packets stored in our database for station/object DJ9FBA-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778011275 | 23.9 C | 41.63 % | 1009.88 hPa | 0 | 0 |
| 1778003535 | 24.9 C | 37.05 % | 1008.5 hPa | 0 | 0 |
| 1777994505 | 25.6 C | 35.26 % | 1007.75 hPa | 0 | 0 |
| 1777989775 | 25.4 C | 34.94 % | 1001.38 hPa | 0 | 0 |
| 1777982707 | 25.4 C | 34.79 % | 1008 hPa | 0 | 0 |
| 1777973677 | 25.3 C | 33.96 % | 1010.25 hPa | 0 | 0 |
| 1777964647 | 25 C | 34.28 % | 1011.25 hPa | 0 | 0 |
| 1777955624 | 24.6 C | 34.85 % | 1013.38 hPa | 0 | 0 |
| 1777947576 | 24.7 C | 34.91 % | 1014 hPa | 0 | 0 |
| 1777938546 | 25 C | 34.15 % | 1014 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)