This is the latest recevied telemetry packets stored in our database for station/object DM2COL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790636401 | 4.16 VDC | 7.22 VDC | 0 | 0 | 0 |
| 1790634601 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790632801 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790631001 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790629201 | 4.16 VDC | 10.78 VDC | 0 | 0 | 0 |
| 1790627400 | 4.16 VDC | 7.38 VDC | 0 | 0 | 0 |
| 1790625600 | 4.16 VDC | 7.22 VDC | 0 | 0 | 0 |
| 1790623800 | 4.16 VDC | 6.9 VDC | 0 | 0 | 0 |
| 1790622000 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790620200 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790618400 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790616600 | 4.16 VDC | 6.28 VDC | 0 | 0 | 0 |
| 1790614799 | 4.16 VDC | 7.06 VDC | 0 | 0 | 0 |
| 1790612999 | 4.16 VDC | 7.52 VDC | 0 | 0 | 0 |
| 1790611199 | 4.16 VDC | 6.9 VDC | 0 | 0 | 0 |
| 1790609399 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790607599 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790605799 | 4.16 VDC | 10.78 VDC | 0 | 0 | 0 |
| 1790603999 | 4.16 VDC | 7.38 VDC | 0 | 0 | 0 |
| 1790602198 | 4.16 VDC | 6.9 VDC | 0 | 0 | 0 |
| 1790600398 | 4.16 VDC | 7.68 VDC | 0 | 0 | 0 |
| 1790598598 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790596798 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790594998 | 4.16 VDC | 16.06 VDC | 0 | 0 | 0 |
| 1790593198 | 4.16 VDC | 5.98 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)