APRS Track Direct

My position About ☰

reset

HS7BHK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS7BHK-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774493924	75 Pkt	70 Pkt	5 Pkt	-74 dBm	0.49 V
1774490182	86 Pkt	58 Pkt	7 Pkt	-73 dBm	0.49 V
1774486456	115 Pkt	49 Pkt	4 Pkt	-73 dBm	0.49 V
1774482738	110 Pkt	35 Pkt	2 Pkt	-74 dBm	0.49 V
1774479034	10 Pkt	3 Pkt	0 Pkt	-74 dBm	0.49 V
1774478153	105 Pkt	22 Pkt	1 Pkt	-74 dBm	0.49 V
1774471784	2 Pkt	0 Pkt	0 Pkt	-76 dBm	0.49 V
1774470670	122 Pkt	40 Pkt	3 Pkt	-74 dBm	0.45 V
1774466964	4 Pkt	2 Pkt	0 Pkt	-74 dBm	0.49 V
1774464473	119 Pkt	40 Pkt	5 Pkt	-76 dBm	0.45 V
1774460768	105 Pkt	44 Pkt	4 Pkt	-77 dBm	0.45 V
1774457057	112 Pkt	37 Pkt	2 Pkt	-75 dBm	0.45 V
1774453353	95 Pkt	36 Pkt	0 Pkt	-75 dBm	0.45 V
1774449648	119 Pkt	22 Pkt	2 Pkt	-75 dBm	0.43 V
1774445963	2 Pkt	0 Pkt	0 Pkt	-74 dBm	0.43 V
1774442706	85 Pkt	21 Pkt	1 Pkt	-77 dBm	0.43 V
1774439030	86 Pkt	22 Pkt	0 Pkt	-77 dBm	0.43 V
1774435352	54 Pkt	21 Pkt	2 Pkt	-78 dBm	0.43 V
1774431678	34 Pkt	21 Pkt	0 Pkt	-78 dBm	0.43 V
1774428016	26 Pkt	22 Pkt	2 Pkt	-78 dBm	0.45 V
1774424357	23 Pkt	20 Pkt	0 Pkt	-76 dBm	0.43 V
1774420699	34 Pkt	22 Pkt	1 Pkt	-76 dBm	0.45 V
1774417037	33 Pkt	24 Pkt	0 Pkt	-75 dBm	0.45 V
1774413370	38 Pkt	21 Pkt	18 Pkt	-77 dBm	0.45 V
1774409710	55 Pkt	22 Pkt	21 Pkt	-76 dBm	0.45 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)