APRS Track Direct

My position About ☰

reset

M5ADQ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M5ADQ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	InetIn*	Temp*
1774109777	8 Pkts	8 Pkts	3 Pkts	0 Pkts	37 C
1774106177	2 Pkts	2 Pkts	1 Pkts	0 Pkts	37 C
1774102577	6 Pkts	6 Pkts	1 Pkts	1 Pkts	36 C
1774098978	11 Pkts	11 Pkts	2 Pkts	2 Pkts	36 C
1774095377	1 Pkts	1 Pkts	0 Pkts	0 Pkts	34 C
1774091777	20 Pkts	20 Pkts	1 Pkts	5 Pkts	31 C
1774088177	1 Pkts	1 Pkts	0 Pkts	0 Pkts	28 C
1774084577	14 Pkts	14 Pkts	7 Pkts	0 Pkts	27 C
1774080977	24 Pkts	20 Pkts	4 Pkts	5 Pkts	27 C
1774077378	60 Pkts	57 Pkts	4 Pkts	6 Pkts	27 C
1774073778	13 Pkts	11 Pkts	3 Pkts	0 Pkts	27 C
1774070180	19 Pkts	17 Pkts	1 Pkts	0 Pkts	27 C
1774066578	30 Pkts	28 Pkts	2 Pkts	7 Pkts	27 C
1774062978	10 Pkts	9 Pkts	3 Pkts	0 Pkts	27 C
1774059379	6 Pkts	6 Pkts	3 Pkts	1 Pkts	28 C
1774055778	8 Pkts	8 Pkts	3 Pkts	0 Pkts	28 C
1774052179	23 Pkts	23 Pkts	7 Pkts	0 Pkts	29 C
1774048578	1 Pkts	1 Pkts	0 Pkts	0 Pkts	29 C
1774044978	1 Pkts	1 Pkts	1 Pkts	1 Pkts	30 C
1774041378	6 Pkts	6 Pkts	3 Pkts	0 Pkts	31 C
1774037778	5 Pkts	5 Pkts	0 Pkts	0 Pkts	31 C
1774034180	16 Pkts	16 Pkts	5 Pkts	1 Pkts	32 C
1774030578	47 Pkts	46 Pkts	9 Pkts	0 Pkts	33 C
1774026978	25 Pkts	24 Pkts	9 Pkts	1 Pkts	34 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

InetIn: 0, 1, 0

Temp: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)