This is the latest recevied telemetry packets stored in our database for station/object DB0HAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Temp* | Dig1h* | RX 1h* | Effic* |
|---|---|---|---|---|---|
| 1836274693 | 14.54 Volt | 24 °C | 0 None | 0 Pcnt | 60 Pkt |
| 1836274543 | 14.62 Volt | 24 °C | 0 None | 0 Pcnt | 60 Pkt |
| 1836274392 | 14.62 Volt | 24.5 °C | 0 None | 0 Pcnt | 60 Pkt |
| 1836274243 | 14.62 Volt | 24 °C | 0 None | 0 Pcnt | 60 Pkt |
| 1836274092 | 14.62 Volt | 24.5 °C | 0 None | 0 Pcnt | 60 Pkt |
| 1762324464 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762324164 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762323863 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762323563 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762323263 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762322963 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762322662 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762322362 | 14.62 Volt | 14.5 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762322062 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762321765 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762321461 | 14.54 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762321161 | 14.62 Volt | 14.5 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762320861 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762320560 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762320260 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762319960 | 14.62 Volt | 14.5 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762319659 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762319359 | 14.62 Volt | 14.5 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762319059 | 14.62 Volt | 14.5 °C | 0 None | 0 Pcnt | 140 Pkt |
| 1762318759 | 14.62 Volt | 15 °C | 0 None | 0 Pcnt | 140 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Temp: 0, 0.5, -63
Dig1h: 0, 10, 0
RX 1h: 0, 10, 0
Effic: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)