APRS Track Direct

My position About ☰

reset

W8VFR-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1836274412	0.07 Rx Erlang	0.01 Tx Erlang	76 count/10m	0 count/10m	14 count/10m
1762335638	0.08 Rx Erlang	0.02 Tx Erlang	84 count/10m	0 count/10m	15 count/10m
1762334438	0.1 Rx Erlang	0.01 Tx Erlang	93 count/10m	0 count/10m	15 count/10m
1762333238	0.09 Rx Erlang	0.02 Tx Erlang	88 count/10m	0 count/10m	19 count/10m
1762332038	0.1 Rx Erlang	0.01 Tx Erlang	103 count/10m	1 count/10m	16 count/10m
1762330838	0.1 Rx Erlang	0.01 Tx Erlang	91 count/10m	2 count/10m	14 count/10m
1762329638	0.1 Rx Erlang	0.02 Tx Erlang	94 count/10m	0 count/10m	15 count/10m
1762328438	0.09 Rx Erlang	0.02 Tx Erlang	90 count/10m	0 count/10m	15 count/10m
1762327238	0.1 Rx Erlang	0.01 Tx Erlang	93 count/10m	0 count/10m	14 count/10m
1762326038	0.08 Rx Erlang	0.02 Tx Erlang	81 count/10m	0 count/10m	14 count/10m
1762324838	0.09 Rx Erlang	0.01 Tx Erlang	88 count/10m	0 count/10m	14 count/10m
1762323638	0.09 Rx Erlang	0.01 Tx Erlang	84 count/10m	2 count/10m	15 count/10m
1762322438	0.1 Rx Erlang	0.02 Tx Erlang	94 count/10m	1 count/10m	19 count/10m
1762321238	0.09 Rx Erlang	0.02 Tx Erlang	89 count/10m	3 count/10m	17 count/10m
1762320038	0.09 Rx Erlang	0.01 Tx Erlang	93 count/10m	1 count/10m	15 count/10m
1762318838	0.11 Rx Erlang	0.01 Tx Erlang	92 count/10m	0 count/10m	13 count/10m
1762317638	0.08 Rx Erlang	0.01 Tx Erlang	81 count/10m	0 count/10m	15 count/10m
1762316438	0.09 Rx Erlang	0.02 Tx Erlang	90 count/10m	2 count/10m	17 count/10m
1762315238	0.08 Rx Erlang	0.02 Tx Erlang	80 count/10m	0 count/10m	14 count/10m
1762314038	0.09 Rx Erlang	0.02 Tx Erlang	93 count/10m	3 count/10m	19 count/10m
1762312838	0.1 Rx Erlang	0.02 Tx Erlang	94 count/10m	1 count/10m	15 count/10m
1762311638	0.1 Rx Erlang	0.02 Tx Erlang	83 count/10m	0 count/10m	17 count/10m
1762310438	0.09 Rx Erlang	0.02 Tx Erlang	93 count/10m	1 count/10m	16 count/10m
1762309238	0.07 Rx Erlang	0.01 Tx Erlang	75 count/10m	0 count/10m	14 count/10m
1762308038	0.08 Rx Erlang	0.01 Tx Erlang	79 count/10m	0 count/10m	13 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)