APRS Track Direct

My position About ☰

reset

IS0AML-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IS0AML-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	DgR*	Eff*
1836274715	0 Pkt	16 Pcnt	18 Pcnt
1836274566	0 Pkt	16 Pcnt	18 Pcnt
1836274415	0 Pkt	16 Pcnt	18 Pcnt
1836274265	0 Pkt	16 Pcnt	18 Pcnt
1836274114	0 Pkt	16 Pcnt	18 Pcnt
1762300606	1 Pkt	6.22 Pcnt	20 Pcnt
1762300306	2 Pkt	6.23 Pcnt	20 Pcnt
1762300005	2 Pkt	6.23 Pcnt	20 Pcnt
1762299705	1 Pkt	6.25 Pcnt	20 Pcnt
1762299405	1 Pkt	6.26 Pcnt	20 Pcnt
1762299104	1 Pkt	6.26 Pcnt	20 Pcnt
1762298804	1 Pkt	6.27 Pcnt	20 Pcnt
1762298504	2 Pkt	6.27 Pcnt	20 Pcnt
1762298204	2 Pkt	6.28 Pcnt	20 Pcnt
1762297903	1 Pkt	6.29 Pcnt	20 Pcnt
1762297603	1 Pkt	6.3 Pcnt	19 Pcnt
1762297303	1 Pkt	6.3 Pcnt	19 Pcnt
1762297002	1 Pkt	6.31 Pcnt	19 Pcnt
1762296702	2 Pkt	6.32 Pcnt	19 Pcnt
1762296402	2 Pkt	6.32 Pcnt	19 Pcnt
1762296102	0 Pkt	6.35 Pcnt	19 Pcnt
1762295801	0 Pkt	6.35 Pcnt	19 Pcnt
1762295501	1 Pkt	6.35 Pcnt	19 Pcnt
1762295201	1 Pkt	6.35 Pcnt	19 Pcnt
1762294900	2 Pkt	6.36 Pcnt	19 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)