This is the latest recevied telemetry packets stored in our database for station/object KL3EX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | DevTemp* | InTemp* | ExTemp* | Other* |
|---|---|---|---|---|---|
| 1792155423 | 8.43 V | 105.8 F | 88.3 F | 37.1 F | 0 |
| 1792154221 | 8.46 V | 105 F | 88.9 F | 37.5 F | 0 |
| 1792153022 | 8.46 V | 105.6 F | 89 F | 37.6 F | 0 |
| 1792151821 | 8.46 V | 105.4 F | 89 F | 38 F | 0 |
| 1792150620 | 8.43 V | 105.4 F | 89.2 F | 38.6 F | 0 |
| 1792149419 | 8.46 V | 105.4 F | 89.3 F | 39.3 F | 0 |
| 1792148218 | 8.46 V | 105.6 F | 89.3 F | 39.6 F | 0 |
| 1792147019 | 8.43 V | 105.9 F | 89.2 F | 39.9 F | 0 |
| 1792145810 | 8.46 V | 106.2 F | 89.8 F | 40.7 F | 0 |
| 1792144688 | 8.46 V | 105.9 F | 89.6 F | 41.4 F | 0 |
| 1792143486 | 8.46 V | 106 F | 89.7 F | 42.8 F | 0 |
| 1792142286 | 8.46 V | 105.9 F | 89.7 F | 43.3 F | 0 |
| 1792141085 | 8.46 V | 106.1 F | 89.8 F | 44 F | 0 |
| 1792139885 | 8.46 V | 105.6 F | 89.6 F | 43.9 F | 0 |
| 1792138684 | 8.43 V | 105.6 F | 89.9 F | 43.8 F | 0 |
| 1792137485 | 8.43 V | 106.3 F | 90.1 F | 45 F | 0 |
| 1792136284 | 8.46 V | 106.2 F | 89.9 F | 46.4 F | 0 |
| 1792135084 | 8.46 V | 106.2 F | 90.1 F | 47 F | 0 |
| 1792133883 | 8.46 V | 106.1 F | 89.8 F | 46.8 F | 0 |
| 1792132682 | 8.46 V | 106 F | 90 F | 46.8 F | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
DevTemp: 0, 0.1, 0
InTemp: 0, 0.1, 0
ExTemp: 0, 0.1, 0
Other: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)