This is the latest recevied telemetry packets stored in our database for station/object VA3ZAW-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770147816 | 4.38 VDC | 0 | 0 | 0 | 0 |
| 1770146913 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1770146010 | 4.41 VDC | 0 | 0 | 0 | 0 |
| 1770145107 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1770144204 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1770143301 | 4.49 VDC | 0 | 0 | 0 | 0 |
| 1770142398 | 5.4 VDC | 0 | 0 | 0 | 0 |
| 1770141495 | 5.4 VDC | 0 | 0 | 0 | 0 |
| 1770140592 | 5.4 VDC | 0 | 0 | 0 | 0 |
| 1770139689 | 5.4 VDC | 0 | 0 | 0 | 0 |
| 1770138786 | 5.39 VDC | 0 | 0 | 0 | 0 |
| 1770137883 | 5.39 VDC | 0 | 0 | 0 | 0 |
| 1770136980 | 5.39 VDC | 0 | 0 | 0 | 0 |
| 1770136077 | 5.38 VDC | 0 | 0 | 0 | 0 |
| 1770135174 | 5.37 VDC | 0 | 0 | 0 | 0 |
| 1770134271 | 5.33 VDC | 0 | 0 | 0 | 0 |
| 1770133368 | 5.34 VDC | 0 | 0 | 0 | 0 |
| 1770132465 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770131562 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770130659 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770129756 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770128853 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770127950 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770127826 | 5.36 VDC | 0 | 0 | 0 | 0 |
| 1770127635 | 5.36 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)