APRS Track Direct

My position About ☰

reset

DL2MF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2MF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Eff1h*	EffTot*	Temp*
1770076921	160 Pkt	96 Pcnt	59 Pcnt	20.5 DegC
1770076021	150 Pkt	94 Pcnt	59 Pcnt	20.5 DegC
1770075121	160 Pkt	94 Pcnt	59 Pcnt	20 DegC
1770074221	170 Pkt	95 Pcnt	59 Pcnt	20 DegC
1770073321	180 Pkt	94 Pcnt	59 Pcnt	19.5 DegC
1770072421	210 Pkt	97 Pcnt	59 Pcnt	19.5 DegC
1770071521	210 Pkt	97 Pcnt	59 Pcnt	19 DegC
1770070621	200 Pkt	97 Pcnt	59 Pcnt	18.5 DegC
1770069721	200 Pkt	97 Pcnt	59 Pcnt	18.5 DegC
1770068821	170 Pkt	96 Pcnt	59 Pcnt	18.5 DegC
1770067921	170 Pkt	94 Pcnt	59 Pcnt	18.5 DegC
1770067021	150 Pkt	94 Pcnt	59 Pcnt	18.5 DegC
1770066121	140 Pkt	93 Pcnt	59 Pcnt	18.5 DegC
1770065221	140 Pkt	96 Pcnt	59 Pcnt	18.5 DegC
1770064321	140 Pkt	97 Pcnt	59 Pcnt	18.5 DegC
1770063421	140 Pkt	94 Pcnt	59 Pcnt	18.5 DegC
1770062521	150 Pkt	94 Pcnt	59 Pcnt	18.5 DegC
1770061621	150 Pkt	94 Pcnt	59 Pcnt	18.5 DegC
1770060721	170 Pkt	91 Pcnt	59 Pcnt	18.5 DegC
1770059821	170 Pkt	91 Pcnt	59 Pcnt	18.5 DegC
1770058021	170 Pkt	86 Pcnt	59 Pcnt	18.5 DegC
1770057122	180 Pkt	88 Pcnt	59 Pcnt	18.5 DegC
1770056221	190 Pkt	90 Pcnt	59 Pcnt	18.5 DegC
1770055321	200 Pkt	92 Pcnt	59 Pcnt	18.5 DegC
1770054421	220 Pkt	93 Pcnt	59 Pcnt	18.5 DegC

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dig1h: 0, 10, 0

Eff1h: 0, 1, 0

EffTot: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)