APRS Track Direct

My position About ☰

reset

YM6KCD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM6KCD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1782530853	0 Pkt	0 Pkt	0 Pkt	-68 dBm	0.59 V
1782530139	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0.55 V
1782529406	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.45 V
1782528707	0 Pkt	0 Pkt	0 Pkt	-65 dBm	0.37 V
1782527894	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.33 V
1782527152	0 Pkt	0 Pkt	0 Pkt	-68 dBm	0.49 V
1782526395	0 Pkt	1 Pkt	0 Pkt	-69 dBm	0.39 V
1782525651	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.84 V
1782524988	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.57 V
1782524330	0 Pkt	0 Pkt	0 Pkt	-65 dBm	0.31 V
1782523453	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0.45 V
1782522853	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.59 V
1782522404	0 Pkt	0 Pkt	0 Pkt	-64 dBm	0.43 V
1782521343	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0.59 V
1782520362	0 Pkt	0 Pkt	0 Pkt	-65 dBm	0.82 V
1782519632	0 Pkt	2 Pkt	0 Pkt	-67 dBm	0.53 V
1782518972	0 Pkt	0 Pkt	0 Pkt	-65 dBm	0.57 V
1782518795	0 Pkt	0 Pkt	0 Pkt	-65 dBm	0.59 V
1782518763	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.45 V
1782518763	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.55 V
1782515927	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0.84 V
1782515327	0 Pkt	0 Pkt	0 Pkt	-67 dBm	0.37 V
1782514495	0 Pkt	0 Pkt	0 Pkt	-65 dBm	0.66 V
1782513818	0 Pkt	0 Pkt	0 Pkt	-66 dBm	0.45 V
1782513818	-	-	-	-	-

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)