This is the latest recevied telemetry packets stored in our database for station/object KC1VMZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774152118 | 3.65 VDC | 30.4 C | 19.56 % | 0 | 0 |
| 1774151215 | 3.68 VDC | 30.5 C | 19.51 % | 0 | 0 |
| 1774150312 | 3.7 VDC | 30.6 C | 19.48 % | 0 | 0 |
| 1774149409 | 3.71 VDC | 30.8 C | 19.33 % | 0 | 0 |
| 1774148506 | 3.72 VDC | 30.4 C | 19.69 % | 0 | 0 |
| 1774147603 | 3.75 VDC | 30.3 C | 19.53 % | 0 | 0 |
| 1774146700 | 3.76 VDC | 30.4 C | 19.52 % | 0 | 0 |
| 1774145797 | 3.79 VDC | 30.5 C | 19.59 % | 0 | 0 |
| 1774144894 | 3.82 VDC | 30.7 C | 19.45 % | 0 | 0 |
| 1774144394 | 3.83 VDC | 31 C | 19.29 % | 0 | 0 |
| 1774143975 | 3.84 VDC | 31.2 C | 19.23 % | 0 | 0 |
| 1774143893 | 3.84 VDC | 31.2 C | 19.21 % | 0 | 0 |
| 1774143575 | 3.84 VDC | 31 C | 19.24 % | 0 | 0 |
| 1774143452 | 3.85 VDC | 30.9 C | 19.43 % | 0 | 0 |
| 1774143393 | 3.84 VDC | 30.6 C | 19.7 % | 0 | 0 |
| 1774143370 | 3.86 VDC | 30.6 C | 19.7 % | 0 | 0 |
| 1774143275 | 3.85 VDC | 29.8 C | 20.31 % | 0 | 0 |
| 1774126099 | 3.55 VDC | 14.7 C | 26.98 % | 0 | 0 |
| 1774125195 | 3.66 VDC | 21.8 C | 17.59 % | 0 | 0 |
| 1774125145 | 3.68 VDC | 27.5 C | 16.56 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)