This is the latest recevied telemetry packets stored in our database for station/object DO1MMV-99. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774123081 | 1011.4 hPa | 11.2 C deg | 57.9 % | 1023.9 hPa | 0 C deg |
| 1774121264 | 1011.5 hPa | 11.4 C deg | 57.9 % | 1023.9 hPa | 0 C deg |
| 1774119449 | 1011.5 hPa | 11.9 C deg | 56.2 % | 1024 hPa | 0 C deg |
| 1774117637 | 1011.4 hPa | 12.3 C deg | 54.7 % | 1023.8 hPa | 0 C deg |
| 1774108550 | 1011.1 hPa | 14.1 C deg | 49.6 % | 1023.4 hPa | 0 C deg |
| 1774104938 | 1011.5 hPa | 14.1 C deg | 49.8 % | 1023.8 hPa | 0 C deg |
| 1774099475 | 1011.6 hPa | 18.3 C deg | 38.6 % | 1023.7 hPa | 0 C deg |
| 1774097663 | 1011.9 hPa | 16.3 C deg | 42.1 % | 1024.1 hPa | 0 C deg |
| 1774092217 | 1012.7 hPa | 13.7 C deg | 51.6 % | 1025 hPa | 0 C deg |
| 1774083147 | 1013.7 hPa | 9.2 C deg | 62.6 % | 1026.3 hPa | 0 C deg |
| 1774063182 | 1013.1 hPa | 7.6 C deg | 62.5 % | 1025.7 hPa | 0 C deg |
| 1774061366 | 1013.1 hPa | 7.7 C deg | 61.7 % | 1025.7 hPa | 0 C deg |
| 1774048655 | 1013.8 hPa | 9.9 C deg | 56.3 % | 1026.3 hPa | 0 C deg |
| 1774045026 | 1014 hPa | 11 C deg | 54.2 % | 1026.4 hPa | 0 C deg |
| 1774041389 | 1014.2 hPa | 11.4 C deg | 54.8 % | 1026.6 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)