APRS Track Direct

My position About ☰

reset

OH5AD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5AD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Max1m*	Max10m*	RxPkts*	DropRxPkts*
1786728732	0.04 Erlang	0.01 Erlang	32 count	0 count
1786727532	0.02 Erlang	0.01 Erlang	24 count	0 count
1786726332	0.04 Erlang	0.01 Erlang	20 count	0 count
1786725132	0.03 Erlang	0.01 Erlang	19 count	0 count
1786723932	0.03 Erlang	0.01 Erlang	25 count	0 count
1786722732	0.01 Erlang	0.01 Erlang	13 count	0 count
1786721532	0.03 Erlang	0.02 Erlang	33 count	0 count
1786720332	0.05 Erlang	0.02 Erlang	54 count	0 count
1786719132	0.04 Erlang	0.02 Erlang	41 count	0 count
1786717932	0.05 Erlang	0.03 Erlang	58 count	0 count
1786716733	0.03 Erlang	0.01 Erlang	20 count	0 count
1786715532	0.02 Erlang	0 Erlang	8 count	0 count
1786714332	0.03 Erlang	0 Erlang	9 count	0 count
1786713133	0.01 Erlang	0 Erlang	4 count	0 count
1786711933	0 Erlang	0 Erlang	1 count	0 count
1786710733	0.02 Erlang	0 Erlang	6 count	2 count
1786709533	0.02 Erlang	0 Erlang	6 count	3 count
1786708333	0.01 Erlang	0 Erlang	1 count	1 count
1786707133	0.02 Erlang	0 Erlang	5 count	0 count
1786705933	0.01 Erlang	0 Erlang	6 count	0 count
1786704733	0.01 Erlang	0 Erlang	3 count	2 count
1786703533	0.02 Erlang	0.01 Erlang	7 count	0 count
1786702333	0.03 Erlang	0.01 Erlang	6 count	1 count
1786701133	0.02 Erlang	0 Erlang	8 count	1 count
1786699934	0.01 Erlang	0 Erlang	2 count	0 count

*Used Equation Coefficients:

Max1m: 0, 0.005, 0

Max10m: 0, 0.005, 0

RxPkts: 0, 1, 0

DropRxPkts: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)