APRS Track Direct

My position About ☰

reset

9M2RIL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2RIL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	TxTraffic*	RSSI*	Voltage*
1766204195	0 Pkt	31 dBm	5.07 V
1766196260	0 Pkt	31 dBm	5.02 V
1766192295	0 Pkt	31 dBm	4.98 V
1766178410	0 Pkt	31 dBm	5.02 V
1766172459	0 Pkt	31 dBm	5.02 V
1766170479	0 Pkt	31 dBm	5 V
1766168495	0 Pkt	31 dBm	5 V
1766162541	0 Pkt	31 dBm	5 V
1766160555	0 Pkt	31 dBm	5 V
1766158578	0 Pkt	31 dBm	5.04 V
1766156589	0 Pkt	31 dBm	5.09 V
1766154603	0 Pkt	31 dBm	5 V
1766150639	0 Pkt	31 dBm	5 V
1766146674	50 Pkt	31 dBm	5.02 V
1766144837	36 Pkt	-61 dBm	5.02 V
1766143009	36 Pkt	-64 dBm	4.98 V
1766141182	1 Pkt	-57 dBm	5 V
1766140865	0 Pkt	31 dBm	5.02 V
1766138880	0 Pkt	31 dBm	5 V
1766132928	0 Pkt	31 dBm	5.02 V
1766130942	0 Pkt	31 dBm	5.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)