This is the latest recevied telemetry packets stored in our database for station/object YO3FVR-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1770371472 | 5 | 23.7 C | 3.54 V | 150 M | 0 |
| 1770369967 | 7 | 23.6 C | 3.56 V | 80 M | 0 |
| 1770368462 | 5 | 23.5 C | 3.57 V | 150 M | 0 |
| 1770366958 | 4 | 23.4 C | 3.57 V | 160 M | 0 |
| 1770365452 | 5 | 23 C | 3.57 V | 160 M | 0 |
| 1770363948 | 6 | 22.3 C | 3.59 V | 170 M | 0 |
| 1770362442 | 7 | 20.3 C | 3.59 V | 110 M | 0 |
| 1770360937 | 7 | 19.5 C | 3.61 V | 150 M | 0 |
| 1770359432 | 7 | 22.5 C | 3.62 V | 100 M | 0 |
| 1770357927 | 6 | 23.3 C | 3.63 V | 130 M | 0 |
| 1770356422 | 7 | 23.1 C | 3.64 V | 110 M | 0 |
| 1770354917 | 4 | 23.1 C | 3.64 V | 140 M | 0 |
| 1770353412 | 7 | 23.1 C | 3.65 V | 130 M | 0 |
| 1770351907 | 5 | 23.3 C | 3.66 V | 110 M | 0 |
| 1770350402 | 6 | 23.3 C | 3.66 V | 150 M | 0 |
| 1770348897 | 6 | 23.5 C | 3.67 V | 120 M | 0 |
| 1770347392 | 6 | 23.3 C | 3.68 V | 120 M | 0 |
| 1770345887 | 6 | 23.4 C | 3.68 V | 160 M | 0 |
| 1770344382 | 8 | 23.4 C | 3.68 V | 140 M | 0 |
| 1770342877 | 7 | 23.6 C | 3.69 V | 150 M | 0 |
| 1770341372 | 5 | 23.6 C | 3.69 V | 100 M | 0 |
| 1770338362 | 7 | 23.7 C | 3.7 V | 130 M | 0 |
| 1770336857 | 7 | 23.8 C | 3.7 V | 90 M | 0 |
| 1770335352 | 7 | 23.9 C | 3.71 V | 160 M | 0 |
| 1770333847 | 6 | 24 C | 3.72 V | 130 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)