This is the latest recevied telemetry packets stored in our database for station/object E25DQY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1782540536 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 69 % |
| 1782538714 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 71 % |
| 1782536892 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 71 % |
| 1782536092 | 0 Pkt | 0 Pkt | 0 Pkt | -68 dBm | 70 % |
| 1782534270 | 0 Pkt | 0 Pkt | 0 Pkt | -69 dBm | 72 % |
| 1782532448 | 0 Pkt | 0 Pkt | 0 Pkt | -70 dBm | 74 % |
| 1782530626 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 73 % |
| 1782528805 | 0 Pkt | 2 Pkt | 0 Pkt | -69 dBm | 73 % |
| 1782526982 | 0 Pkt | 4 Pkt | 0 Pkt | -65 dBm | 69 % |
| 1782525160 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 67 % |
| 1782523338 | 0 Pkt | 4 Pkt | 0 Pkt | -66 dBm | 65 % |
| 1782521516 | 0 Pkt | 2 Pkt | 0 Pkt | -63 dBm | 65 % |
| 1782519694 | 0 Pkt | 6 Pkt | 0 Pkt | -65 dBm | 57 % |
| 1782517871 | 0 Pkt | 0 Pkt | 0 Pkt | -66 dBm | 45 % |
| 1782516049 | 0 Pkt | 0 Pkt | 0 Pkt | -67 dBm | 33 % |
| 1782514227 | 0 Pkt | 1 Pkt | 0 Pkt | -65 dBm | 4 % |
| 1782512405 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782510583 | 0 Pkt | 2 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782508761 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
| 1782506939 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782505117 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782503268 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782501446 | 0 Pkt | 3 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782499624 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 0 % |
| 1782497802 | 0 Pkt | 0 Pkt | 0 Pkt | -65 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)