This is the latest recevied telemetry packets stored in our database for station/object HS5GDX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1790667970 | 0 Pkt | 8 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1790664348 | 0 Pkt | 4 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1790664348 | 0 Pkt | 4 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1790660726 | 0 Pkt | 12 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1790657102 | 0 Pkt | 1 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1790655702 | 0 Pkt | 5 Pkt | 0 Pkt | -40 dBm | 0 V |
| 1790652088 | 0 Pkt | 6 Pkt | 0 Pkt | -40 dBm | 0 V |
| 1790648456 | 0 Pkt | 5 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1790644834 | 2 Pkt | 10 Pkt | 0 Pkt | -33 dBm | 0 V |
| 1790641196 | 1 Pkt | 17 Pkt | 0 Pkt | -34 dBm | 0 V |
| 1790637573 | 0 Pkt | 5 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1790633951 | 0 Pkt | 1 Pkt | 0 Pkt | -37 dBm | 0 V |
| 1790630329 | 0 Pkt | 0 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1790626707 | 0 Pkt | 3 Pkt | 0 Pkt | -34 dBm | 0 V |
| 1790623085 | 0 Pkt | 4 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1790619463 | 0 Pkt | 1 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1790615841 | 0 Pkt | 3 Pkt | 0 Pkt | -38 dBm | 0 V |
| 1790612218 | 0 Pkt | 7 Pkt | 0 Pkt | -30 dBm | 0 V |
| 1790608596 | 0 Pkt | 4 Pkt | 0 Pkt | -39 dBm | 0 V |
| 1790608008 | 0 Pkt | 6 Pkt | 0 Pkt | -44 dBm | 0 V |
| 1790604386 | 0 Pkt | 2 Pkt | 0 Pkt | -43 dBm | 0 V |
| 1790600764 | 0 Pkt | 1 Pkt | 0 Pkt | -36 dBm | 0 V |
| 1790597142 | 0 Pkt | 0 Pkt | 0 Pkt | -41 dBm | 0 V |
| 1790593520 | 0 Pkt | 4 Pkt | 0 Pkt | -35 dBm | 0 V |
| 1790589883 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)