This is the latest recevied telemetry packets stored in our database for station/object SP6TID-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatura CPU* | Obciazenie CPU* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779819605 | 29 Deg.C | 4 % | 0 | 0 | 0 |
| 1779819002 | 30 Deg.C | 4 % | 0 | 0 | 0 |
| 1779818405 | 28 Deg.C | 4 % | 0 | 0 | 0 |
| 1779817802 | 28 Deg.C | 4 % | 0 | 0 | 0 |
| 1779817202 | 27 Deg.C | 4 % | 0 | 0 | 0 |
| 1779816606 | 26 Deg.C | 4 % | 0 | 0 | 0 |
| 1779816002 | 27 Deg.C | 4 % | 0 | 0 | 0 |
| 1779815405 | 24 Deg.C | 5 % | 0 | 0 | 0 |
| 1779814802 | 21 Deg.C | 6 % | 0 | 0 | 0 |
| 1779814246 | 10 Deg.C | 65 % | 0 | 0 | 0 |
| 1779810602 | 21 Deg.C | 5 % | 0 | 0 | 0 |
| 1779810006 | 14 Deg.C | 7 % | 0 | 0 | 0 |
| 1779809537 | 2 Deg.C | 63 % | 0 | 0 | 0 |
| 1779772806 | 26 Deg.C | 4 % | 0 | 0 | 0 |
| 1779772202 | 27 Deg.C | 5 % | 0 | 0 | 0 |
| 1779771605 | 29 Deg.C | 5 % | 0 | 0 | 0 |
| 1779771002 | 28 Deg.C | 7 % | 0 | 0 | 0 |
| 1779770405 | 4 Deg.C | 14 % | 0 | 0 | 0 |
| 1779740406 | 29 Deg.C | 3 % | 0 | 0 | 0 |
| 1779739802 | 31 Deg.C | 4 % | 0 | 0 | 0 |
| 1779739205 | 32 Deg.C | 4 % | 0 | 0 | 0 |
| 1779738602 | 38 Deg.C | 4 % | 0 | 0 | 0 |
| 1779738001 | 29 Deg.C | 3 % | 0 | 0 | 0 |
| 1779737406 | 29 Deg.C | 3 % | 0 | 0 | 0 |
| 1779736802 | 29 Deg.C | 4 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temperatura CPU: 0, 0.1, 0
Obciazenie CPU: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)