APRS Track Direct

My position About ☰

reset

HB9HSN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9HSN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.in*	Rx.1h*	Eff.1h*	Temp*
1790651526	12.15 Volt	280 Pkt	81 Pcnt	33 C
1790651226	12.23 Volt	290 Pkt	81 Pcnt	33 C
1790650926	12.23 Volt	270 Pkt	80 Pcnt	33 C
1790650626	12.23 Volt	260 Pkt	80 Pcnt	33 C
1790650326	12.23 Volt	280 Pkt	82 Pcnt	33 C
1790650026	12.23 Volt	280 Pkt	83 Pcnt	33 C
1790649726	12.23 Volt	290 Pkt	84 Pcnt	33 C
1790649426	12.15 Volt	310 Pkt	86 Pcnt	33 C
1790649126	12.15 Volt	310 Pkt	86 Pcnt	33 C
1790648826	12.23 Volt	310 Pkt	86 Pcnt	33 C
1790648526	12.15 Volt	310 Pkt	86 Pcnt	33 C
1790648226	12.15 Volt	300 Pkt	86 Pcnt	33 C
1790647926	12.23 Volt	300 Pkt	85 Pcnt	33 C
1790647626	12.23 Volt	300 Pkt	85 Pcnt	33 C
1790647326	12.15 Volt	300 Pkt	85 Pcnt	33 C
1790647026	12.23 Volt	300 Pkt	86 Pcnt	33 C
1790646726	12.23 Volt	300 Pkt	85 Pcnt	33 C
1790646426	12.23 Volt	300 Pkt	86 Pcnt	33 C
1790646126	12.15 Volt	300 Pkt	86 Pcnt	33 C
1790645826	12.23 Volt	280 Pkt	84 Pcnt	33 C
1790645526	12.15 Volt	290 Pkt	85 Pcnt	33 C
1790645226	12.15 Volt	280 Pkt	85 Pcnt	33 C
1790644926	12.23 Volt	290 Pkt	86 Pcnt	33 C
1790644626	12.23 Volt	290 Pkt	85 Pcnt	33 C
1790644326	12.23 Volt	280 Pkt	85 Pcnt	33 C

*Used Equation Coefficients:

V.in: 0, 0.075, 0

Rx.1h: 0, 10, 0

Dg.1h: 0, 10, 0

Eff.1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)