APRS Track Direct

My position About ☰

reset

OE9XPT-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9XPT-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1744946563	14.03 Volt	30 Pkt	8 Pcnt	7 °c
1744946263	14.03 Volt	30 Pkt	8 Pcnt	7 °c
1744945963	14.03 Volt	30 Pkt	8 Pcnt	7 °c
1744945663	14.03 Volt	30 Pkt	9 Pcnt	7 °c
1744945363	14.03 Volt	40 Pkt	10 Pcnt	7 °c
1744945063	14.03 Volt	40 Pkt	10 Pcnt	7 °c
1744944763	14.03 Volt	40 Pkt	11 Pcnt	7 °c
1744944463	14.03 Volt	40 Pkt	11 Pcnt	7 °c
1744944163	14.03 Volt	40 Pkt	11 Pcnt	7 °c
1744943863	14.03 Volt	50 Pkt	12 Pcnt	7 °c
1744943563	14.03 Volt	50 Pkt	12 Pcnt	7 °c
1744943263	13.95 Volt	40 Pkt	10 Pcnt	7 °c
1744942963	14.03 Volt	40 Pkt	12 Pcnt	7 °c
1744942663	13.95 Volt	40 Pkt	12 Pcnt	7 °c
1744942363	13.95 Volt	40 Pkt	13 Pcnt	7 °c
1744942063	14.03 Volt	50 Pkt	13 Pcnt	7 °c
1744941763	14.03 Volt	50 Pkt	13 Pcnt	7 °c
1744941463	14.03 Volt	40 Pkt	13 Pcnt	7 °c
1744941163	14.03 Volt	50 Pkt	13 Pcnt	7 °c
1744940863	14.03 Volt	50 Pkt	14 Pcnt	7 °c
1744940563	14.03 Volt	50 Pkt	14 Pcnt	7 °c
1744940263	14.03 Volt	50 Pkt	15 Pcnt	7 °c
1744939963	14.03 Volt	50 Pkt	15 Pcnt	7 °c
1744939663	14.03 Volt	50 Pkt	15 Pcnt	7 °c
1744939363	14.03 Volt	50 Pkt	14 Pcnt	7 °c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)