APRS Track Direct

My position About ☰

reset

9M2OZF-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2OZF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1754145572	14 Pkt	2 Pkt	-57 dBm	5 V
1754143746	2 Pkt	3 Pkt	-57 dBm	5.02 V
1754142639	8 Pkt	5 Pkt	-64 dBm	5.07 V
1754140813	6 Pkt	6 Pkt	-62 dBm	5.02 V
1754138987	5 Pkt	13 Pkt	-59 dBm	5.02 V
1754137161	16 Pkt	41 Pkt	-57 dBm	5.02 V
1754135333	29 Pkt	6 Pkt	-59 dBm	5.02 V
1754133506	10 Pkt	7 Pkt	-58 dBm	5 V
1754131680	33 Pkt	42 Pkt	-59 dBm	5.07 V
1754129850	41 Pkt	58 Pkt	-59 dBm	5 V
1754128021	20 Pkt	23 Pkt	-58 dBm	5.02 V
1754126192	25 Pkt	19 Pkt	-61 dBm	5.02 V
1754124365	4 Pkt	7 Pkt	-60 dBm	5.02 V
1754122539	31 Pkt	18 Pkt	-62 dBm	4.98 V
1754120710	26 Pkt	40 Pkt	-58 dBm	5.02 V
1754118882	28 Pkt	5 Pkt	-60 dBm	5.02 V
1754117056	62 Pkt	8 Pkt	-58 dBm	5.07 V
1754115227	40 Pkt	5 Pkt	-58 dBm	5.02 V
1754113401	24 Pkt	7 Pkt	-57 dBm	5.02 V
1754111574	4 Pkt	6 Pkt	-58 dBm	5.02 V
1754109749	10 Pkt	19 Pkt	-59 dBm	5.02 V
1754107923	1 Pkt	3 Pkt	-58 dBm	5.07 V
1754107270	53 Pkt	10 Pkt	-59 dBm	5 V
1754105442	3 Pkt	10 Pkt	-60 dBm	4.74 V
1754103616	1 Pkt	10 Pkt	-57 dBm	4.68 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)