APRS Track Direct

My position About ☰

reset

OH5GDN-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5GDN-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1770167253	0.26 Load	61.22 DegC	141 Mb	297 Pkt	219 Pkt
1770166953	0.25 Load	60.15 DegC	202 Mb	268 Pkt	180 Pkt
1770166653	0.25 Load	60.15 DegC	207 Mb	262 Pkt	169 Pkt
1770166353	0.21 Load	60.69 DegC	202 Mb	254 Pkt	168 Pkt
1770166053	0.23 Load	61.22 DegC	202 Mb	258 Pkt	174 Pkt
1770165753	0.22 Load	60.69 DegC	204 Mb	258 Pkt	171 Pkt
1770165453	0.2 Load	60.69 DegC	204 Mb	268 Pkt	180 Pkt
1770165153	0.28 Load	60.69 DegC	202 Mb	264 Pkt	177 Pkt
1770164853	0.31 Load	60.69 DegC	205 Mb	268 Pkt	182 Pkt
1770164553	0.25 Load	60.69 DegC	198 Mb	261 Pkt	175 Pkt
1770164253	0.36 Load	60.69 DegC	203 Mb	263 Pkt	178 Pkt
1770163953	0.36 Load	60.15 DegC	206 Mb	265 Pkt	179 Pkt
1770163653	0.21 Load	60.69 DegC	202 Mb	266 Pkt	178 Pkt
1770163353	0.24 Load	60.15 DegC	205 Mb	258 Pkt	169 Pkt
1770163053	0.29 Load	60.15 DegC	205 Mb	264 Pkt	177 Pkt
1770162753	0.21 Load	60.15 DegC	206 Mb	266 Pkt	180 Pkt
1770162453	0.25 Load	60.69 DegC	200 Mb	266 Pkt	183 Pkt
1770162153	0.33 Load	60.69 DegC	203 Mb	266 Pkt	179 Pkt
1770161853	0.39 Load	60.15 DegC	199 Mb	274 Pkt	185 Pkt
1770161553	0.43 Load	60.15 DegC	204 Mb	260 Pkt	175 Pkt
1770161253	0.43 Load	60.15 DegC	200 Mb	256 Pkt	169 Pkt
1770160953	0.35 Load	60.15 DegC	201 Mb	260 Pkt	176 Pkt
1770160653	0.3 Load	60.69 DegC	199 Mb	266 Pkt	181 Pkt
1770160354	0.23 Load	60.15 DegC	199 Mb	254 Pkt	165 Pkt
1770160053	0.21 Load	60.69 DegC	198 Mb	258 Pkt	170 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)