This is the latest recevied telemetry packets stored in our database for station/object LW8EUA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1779780374 | 43 Pkt | 4 Pkt | 0 Pkt | -29 dBm | 0 % |
| 1779778550 | 37 Pkt | 6 Pkt | 0 Pkt | -28 dBm | 0 % |
| 1779776726 | 30 Pkt | 4 Pkt | 0 Pkt | -36 dBm | 0 % |
| 1779774902 | 34 Pkt | 5 Pkt | 1 Pkt | -29 dBm | 0 % |
| 1779773078 | 15 Pkt | 5 Pkt | 1 Pkt | -29 dBm | 0 % |
| 1779771254 | 15 Pkt | 4 Pkt | 0 Pkt | -28 dBm | 0 % |
| 1779769430 | 8 Pkt | 3 Pkt | 1 Pkt | -28 dBm | 0 % |
| 1779767606 | 12 Pkt | 4 Pkt | 1 Pkt | -26 dBm | 0 % |
| 1779765782 | 1 Pkt | 2 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1779763958 | 0 Pkt | 5 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779762134 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779760310 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779758486 | 0 Pkt | 2 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779756662 | 0 Pkt | 0 Pkt | 0 Pkt | -29 dBm | 0 % |
| 1779754838 | 0 Pkt | 4 Pkt | 0 Pkt | -25 dBm | 0 % |
| 1779753014 | 0 Pkt | 0 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779751190 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1779749359 | 2 Pkt | 1 Pkt | 0 Pkt | -29 dBm | 0 % |
| 1779747535 | 0 Pkt | 1 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779745712 | 1 Pkt | 1 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779743888 | 0 Pkt | 2 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779742064 | 0 Pkt | 0 Pkt | 0 Pkt | -26 dBm | 0 % |
| 1779738284 | 2 Pkt | 1 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779736460 | 2 Pkt | 1 Pkt | 0 Pkt | -27 dBm | 0 % |
| 1779734637 | 0 Pkt | 2 Pkt | 0 Pkt | -27 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)