This is the latest recevied telemetry packets stored in our database for station/object ER-IR3UBH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766225995 | 5 | 97 | 2 | 12 | 0 |
| 1766225395 | 0 | 109 | 0 | 14 | 0 |
| 1766224795 | 0 | 39 | 0 | 4 | 0 |
| 1766224195 | 0 | 64 | 0 | 7 | 0 |
| 1766223595 | 0 | 944 | 0 | 12 | 0 |
| 1766222995 | 0 | 67 | 1 | 6 | 0 |
| 1766222395 | 0 | 877 | 0 | 7 | 0 |
| 1766221795 | 8 | 424 | 2 | 10 | 0 |
| 1766221195 | 0 | 104 | 0 | 8 | 0 |
| 1766220595 | 0 | 12 | 0 | 1 | 0 |
| 1766219995 | 0 | 48 | 0 | 5 | 0 |
| 1766219395 | 3 | 103 | 4 | 12 | 0 |
| 1766218795 | 0 | 12 | 0 | 1 | 0 |
| 1766218195 | 0 | 72 | 0 | 5 | 0 |
| 1766217595 | 1 | 988 | 1 | 4 | 0 |
| 1766216995 | 0 | 948 | 0 | 11 | 0 |
| 1766216395 | 0 | 575 | 0 | 6 | 0 |
| 1766215795 | 0 | 0 | 0 | 0 | 0 |
| 1766215195 | 0 | 30 | 0 | 5 | 0 |
| 1766214595 | 7 | 65 | 2 | 6 | 0 |
| 1766213995 | 0 | 0 | 0 | 0 | 0 |
| 1766213395 | 0 | 12 | 0 | 1 | 0 |
| 1766212795 | 0 | 12 | 0 | 1 | 0 |
| 1766212195 | 0 | 0 | 0 | 0 | 0 |
| 1766211595 | 0 | 20 | 0 | 2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)