This is the latest recevied telemetry packets stored in our database for station/object KB1IKN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794905716 | 145 | 165 | 139 | 0 | 0 |
| 1794903898 | 145 | 166 | 144 | 0 | 0 |
| 1794900266 | 145 | 166 | 148 | 0 | 0 |
| 1794896633 | 145 | 166 | 146 | 0 | 0 |
| 1794894817 | 146 | 166 | 148 | 0 | 0 |
| 1794891184 | 145 | 166 | 149 | 0 | 0 |
| 1794889368 | 145 | 166 | 150 | 0 | 0 |
| 1794887552 | 145 | 166 | 146 | 0 | 0 |
| 1794885736 | 145 | 166 | 150 | 0 | 0 |
| 1794882103 | 145 | 166 | 145 | 0 | 0 |
| 1794876654 | 146 | 166 | 149 | 0 | 0 |
| 1794874838 | 145 | 166 | 145 | 0 | 0 |
| 1794873022 | 145 | 166 | 149 | 0 | 0 |
| 1794871205 | 145 | 166 | 150 | 0 | 0 |
| 1794869389 | 145 | 166 | 151 | 0 | 0 |
| 1794867573 | 145 | 166 | 143 | 0 | 0 |
| 1794863940 | 145 | 166 | 145 | 0 | 0 |
| 1794860308 | 145 | 167 | 148 | 0 | 0 |
| 1794856675 | 145 | 169 | 155 | 0 | 0 |
| 1794854859 | 146 | 170 | 157 | 0 | 0 |
| 1794851226 | 145 | 166 | 152 | 0 | 0 |
| 1794849410 | 145 | 166 | 152 | 0 | 0 |
| 1794847594 | 145 | 167 | 155 | 0 | 0 |
| 1794843961 | 144 | 166 | 153 | 0 | 0 |
| 1794840329 | 145 | 166 | 151 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)