APRS Track Direct

My position About ☰

reset

IR2BY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2BY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1836274612	7 Pkt	50 Pkt	0 Pkt	0.22 Pcnt	37 Pcnt
1836274463	7 Pkt	40 Pkt	0 Pkt	0.22 Pcnt	35 Pcnt
1836274312	7 Pkt	50 Pkt	0 Pkt	0.22 Pcnt	37 Pcnt
1836274163	7 Pkt	50 Pkt	0 Pkt	0.22 Pcnt	37 Pcnt
1836274012	9 Pkt	50 Pkt	0 Pkt	0.22 Pcnt	36 Pcnt
1762330623	16 Pkt	160 Pkt	0 Pkt	1.21 Pcnt	60 Pcnt
1762330323	11 Pkt	170 Pkt	0 Pkt	1.21 Pcnt	60 Pcnt
1762330023	14 Pkt	180 Pkt	0 Pkt	1.21 Pcnt	58 Pcnt
1762329722	20 Pkt	180 Pkt	0 Pkt	1.21 Pcnt	58 Pcnt
1762329422	30 Pkt	170 Pkt	0 Pkt	1.21 Pcnt	57 Pcnt
1762329122	24 Pkt	170 Pkt	0 Pkt	1.21 Pcnt	59 Pcnt
1762328822	20 Pkt	170 Pkt	0 Pkt	1.21 Pcnt	60 Pcnt
1762328521	32 Pkt	190 Pkt	10 Pkt	1.21 Pcnt	61 Pcnt
1762328221	45 Pkt	190 Pkt	22 Pkt	1.21 Pcnt	60 Pcnt
1762327921	43 Pkt	170 Pkt	16 Pkt	1.21 Pcnt	61 Pcnt
1762327621	19 Pkt	150 Pkt	0 Pkt	1.21 Pcnt	57 Pcnt
1762327320	28 Pkt	160 Pkt	0 Pkt	1.21 Pcnt	61 Pcnt
1762327020	27 Pkt	160 Pkt	0 Pkt	1.21 Pcnt	63 Pcnt
1762326720	22 Pkt	150 Pkt	0 Pkt	1.21 Pcnt	63 Pcnt
1762326419	12 Pkt	140 Pkt	0 Pkt	1.21 Pcnt	65 Pcnt
1762326119	13 Pkt	140 Pkt	0 Pkt	1.21 Pcnt	64 Pcnt
1762325819	31 Pkt	140 Pkt	13 Pkt	1.21 Pcnt	65 Pcnt
1762325519	47 Pkt	130 Pkt	24 Pkt	1.21 Pcnt	62 Pcnt
1762325218	32 Pkt	120 Pkt	10 Pkt	1.21 Pcnt	59 Pcnt
1762324918	19 Pkt	100 Pkt	0 Pkt	1.21 Pcnt	57 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)