APRS Track Direct

My position About ☰

reset

IR3EH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3EH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1782501089	89 Pkt	690 Pkt	0.17 Pcnt	48 Pcnt
1782500789	105 Pkt	690 Pkt	0.17 Pcnt	48 Pcnt
1782500489	109 Pkt	690 Pkt	0.17 Pcnt	48 Pcnt
1782500189	89 Pkt	670 Pkt	0.17 Pcnt	48 Pcnt
1782499889	117 Pkt	680 Pkt	0.17 Pcnt	48 Pcnt
1782499589	119 Pkt	670 Pkt	0.17 Pcnt	48 Pcnt
1782499289	90 Pkt	670 Pkt	0.17 Pcnt	48 Pcnt
1782498989	105 Pkt	670 Pkt	0.17 Pcnt	48 Pcnt
1782498689	111 Pkt	660 Pkt	0.17 Pcnt	48 Pcnt
1782498389	105 Pkt	670 Pkt	0.17 Pcnt	48 Pcnt
1782498089	121 Pkt	680 Pkt	0.17 Pcnt	48 Pcnt
1782497789	109 Pkt	680 Pkt	0.17 Pcnt	48 Pcnt
1782497489	91 Pkt	690 Pkt	0.17 Pcnt	48 Pcnt
1782497189	93 Pkt	690 Pkt	0.17 Pcnt	48 Pcnt
1782496889	93 Pkt	690 Pkt	0.17 Pcnt	48 Pcnt
1782496589	87 Pkt	700 Pkt	0.17 Pcnt	48 Pcnt
1782496289	108 Pkt	720 Pkt	0.17 Pcnt	48 Pcnt
1782495989	113 Pkt	730 Pkt	0.17 Pcnt	48 Pcnt
1782495689	90 Pkt	710 Pkt	0.17 Pcnt	48 Pcnt
1782495389	110 Pkt	730 Pkt	0.17 Pcnt	48 Pcnt
1782495089	123 Pkt	760 Pkt	0.17 Pcnt	48 Pcnt
1782494789	115 Pkt	760 Pkt	0.17 Pcnt	48 Pcnt
1782494489	129 Pkt	770 Pkt	0.17 Pcnt	48 Pcnt
1782494189	108 Pkt	780 Pkt	0.17 Pcnt	48 Pcnt
1782493889	99 Pkt	790 Pkt	0.17 Pcnt	48 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)