This is the latest recevied telemetry packets stored in our database for station/object VK2RZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Cpu* | Temp* | FreeM* | RxP* | TxP* |
|---|---|---|---|---|---|
| 1792150144 | 0.2 Load | 44 DegC | 11805 Mb | 923 Pkt | 1870 Pkt |
| 1792149544 | 0.21 Load | 46 DegC | 11804 Mb | 1581 Pkt | 1687 Pkt |
| 1792148944 | 0.22 Load | 45 DegC | 11805 Mb | 1509 Pkt | 1264 Pkt |
| 1792148344 | 0.23 Load | 45 DegC | 11794 Mb | 859 Pkt | 1808 Pkt |
*Used Equation Coefficients:
Cpu: 0, 0.001, 0
Temp: 0, 0.001, 0
FreeM: 0, 1, 0
RxP: 0, 1, 0
TxP: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)