This is the latest recevied telemetry packets stored in our database for station/object HS0QKD-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1782551394 | 0 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 53 % |
| 1782550739 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 60 % |
| 1782548245 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 66 % |
| 1782547623 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 50 % |
| 1782547001 | 0 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 68 % |
| 1782546379 | 0 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 65 % |
| 1782545761 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 72 % |
| 1782545135 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 71 % |
| 1782544513 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 69 % |
| 1782543891 | 0 Pkt | 1 Pkt | 0 Pkt | -79 dBm | 72 % |
| 1782543269 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 72 % |
| 1782542647 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 70 % |
| 1782542025 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 71 % |
| 1782541403 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 68 % |
| 1782540781 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 71 % |
| 1782540159 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 72 % |
| 1782539537 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 73 % |
| 1782538915 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 66 % |
| 1782538295 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 71 % |
| 1782537670 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 71 % |
| 1782536687 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 71 % |
| 1782536105 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 71 % |
| 1782535491 | 0 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 69 % |
| 1782534730 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 70 % |
| 1782534192 | 0 Pkt | 0 Pkt | 0 Pkt | -88 dBm | 70 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)