APRS Track Direct

My position About ☰

reset

XE2J-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2J-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Vin*	Vin*	TempEx*	TmpIn*
1732288838	13.28 Volt	13.5 Volt	13.58 Volt	21.5 C	63.5 C
1732287938	13.28 Volt	13.43 Volt	13.43 Volt	20.5 C	63.5 C
1732287038	13.28 Volt	13.35 Volt	13.43 Volt	20 C	63.5 C
1732286138	13.28 Volt	13.28 Volt	13.28 Volt	19 C	63.5 C
1732285239	13.2 Volt	13.2 Volt	13.2 Volt	18 C	63.5 C
1732284338	13.2 Volt	13.13 Volt	13.2 Volt	16 C	63.5 C
1732283438	13.2 Volt	13.13 Volt	13.13 Volt	15 C	63.5 C
1732282538	13.28 Volt	13.13 Volt	13.13 Volt	13.5 C	63.5 C
1732281638	13.2 Volt	13.13 Volt	13.13 Volt	11 C	63.5 C
1732280738	13.28 Volt	13.13 Volt	13.13 Volt	10.5 C	63.5 C
1732279838	13.2 Volt	13.13 Volt	13.13 Volt	10.5 C	63.5 C
1732278938	13.28 Volt	13.13 Volt	13.13 Volt	11.5 C	63.5 C
1732278038	13.28 Volt	13.13 Volt	13.13 Volt	11.5 C	63.5 C
1732277138	13.28 Volt	13.13 Volt	13.13 Volt	11 C	63.5 C
1732276239	13.28 Volt	13.13 Volt	13.13 Volt	9.5 C	63.5 C
1732275339	13.28 Volt	13.13 Volt	13.13 Volt	9.5 C	63.5 C
1732274438	13.28 Volt	13.13 Volt	13.13 Volt	9.5 C	63.5 C
1732273538	13.28 Volt	13.13 Volt	13.13 Volt	10 C	63.5 C
1732272639	13.28 Volt	13.13 Volt	13.2 Volt	9.5 C	63.5 C
1732271738	13.28 Volt	13.13 Volt	13.2 Volt	11 C	63.5 C
1732270839	13.28 Volt	13.13 Volt	13.2 Volt	11.5 C	63.5 C
1732269939	13.28 Volt	13.2 Volt	13.2 Volt	12 C	63.5 C
1732269039	13.28 Volt	13.2 Volt	13.2 Volt	12.5 C	63.5 C
1732268139	13.28 Volt	13.2 Volt	13.2 Volt	12.5 C	63.5 C
1732267239	13.28 Volt	13.2 Volt	13.2 Volt	12.5 C	63.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

TempEx: 0, 0.5, -64

TmpIn: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)