APRS Track Direct

My position About ☰

reset

KI6GVQ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KI6GVQ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1790651914	0.54 Load	28.72 DegC	296 Mb	9326 Pkt	7945 Pkt
1790651615	0.47 Load	30.18 DegC	288 Mb	9469 Pkt	8098 Pkt
1790651315	0.22 Load	29.21 DegC	285 Mb	9563 Pkt	8148 Pkt
1790651015	0.4 Load	29.21 DegC	293 Mb	9436 Pkt	8057 Pkt
1790650715	0.4 Load	29.21 DegC	284 Mb	9066 Pkt	7611 Pkt
1790650414	0.35 Load	29.21 DegC	286 Mb	9136 Pkt	7647 Pkt
1790650115	0.29 Load	29.21 DegC	296 Mb	9168 Pkt	7767 Pkt
1790649815	0.5 Load	30.18 DegC	290 Mb	9080 Pkt	7726 Pkt
1790649515	1.02 Load	29.69 DegC	285 Mb	8899 Pkt	7380 Pkt
1790649215	0.86 Load	29.69 DegC	288 Mb	9231 Pkt	7865 Pkt
1790648915	0.81 Load	29.69 DegC	294 Mb	8967 Pkt	7500 Pkt
1790648614	0.79 Load	29.69 DegC	287 Mb	9237 Pkt	7906 Pkt
1790648315	0.61 Load	29.21 DegC	302 Mb	9155 Pkt	7700 Pkt
1790648014	0.84 Load	30.67 DegC	295 Mb	9206 Pkt	7892 Pkt
1790647715	0.64 Load	30.18 DegC	297 Mb	9120 Pkt	7708 Pkt
1790647415	0.8 Load	30.18 DegC	301 Mb	9336 Pkt	8027 Pkt
1790647115	0.84 Load	30.67 DegC	300 Mb	8734 Pkt	7821 Pkt
1790646815	1.47 Load	30.18 DegC	302 Mb	9096 Pkt	7764 Pkt
1790646515	0.56 Load	31.15 DegC	304 Mb	8026 Pkt	6465 Pkt
1790646215	0.96 Load	31.15 DegC	322 Mb	5204 Pkt	3354 Pkt
1790645914	0.58 Load	31.64 DegC	312 Mb	4687 Pkt	2780 Pkt
1790645615	1.13 Load	30.67 DegC	323 Mb	4916 Pkt	3020 Pkt
1790645314	1.13 Load	32.13 DegC	322 Mb	49003 Pkt	30864 Pkt
1790645015	1.39 Load	32.13 DegC	378 Mb	2847 Pkt	1531 Pkt
1790644714	1.26 Load	32.13 DegC	370 Mb	2761 Pkt	1440 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)