This is the latest recevied telemetry packets stored in our database for station/object IW3BRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU Temp* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750152602 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750149002 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750145401 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750141801 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750138202 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750134602 | 63.9 Deg.C | 0 | 0 | 0 | 0 |
| 1750131002 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750127401 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750123802 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750120202 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750116602 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750113002 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750109402 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750105801 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750102202 | 65 Deg.C | 0 | 0 | 0 | 0 |
| 1750098602 | 63.9 Deg.C | 0 | 0 | 0 | 0 |
| 1750095002 | 65 Deg.C | 0 | 0 | 0 | 0 |
| 1750091401 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750087802 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750084202 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750080602 | 64.5 Deg.C | 0 | 0 | 0 | 0 |
| 1750077002 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
| 1750073401 | 63.9 Deg.C | 0 | 0 | 0 | 0 |
| 1750069802 | 63.4 Deg.C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU Temp: 0, 0.1, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)