This is the latest recevied telemetry packets stored in our database for station/object DF5RJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790657069 | 6.9 deg C | 84.7 % | 1023.2 hPa | 0 | 0 |
| 1790656169 | 7 deg C | 85.3 % | 1023.2 hPa | 0 | 0 |
| 1790654102 | 7.3 deg C | 85.4 % | 1023.2 hPa | 0 | 0 |
| 1790653202 | 7.6 deg C | 85.1 % | 1023.2 hPa | 0 | 0 |
| 1790652301 | 7.7 deg C | 84.8 % | 1023.2 hPa | 0 | 0 |
| 1790651401 | 7.6 deg C | 85.9 % | 1023.2 hPa | 0 | 0 |
| 1790650501 | 7.9 deg C | 84.6 % | 1023.2 hPa | 0 | 0 |
| 1790649601 | 7.9 deg C | 85.4 % | 1023.2 hPa | 0 | 0 |
| 1790648701 | 7.8 deg C | 86 % | 1023.3 hPa | 0 | 0 |
| 1790647801 | 8.1 deg C | 84.4 % | 1023.1 hPa | 0 | 0 |
| 1790646901 | 8 deg C | 84.7 % | 1023.1 hPa | 0 | 0 |
| 1790646001 | 8.6 deg C | 81.5 % | 1023 hPa | 0 | 0 |
| 1790645668 | 8.8 deg C | 81.2 % | 1023 hPa | 0 | 0 |
| 1790644768 | 8.8 deg C | 81.9 % | 1023 hPa | 0 | 0 |
| 1790643868 | 8.9 deg C | 81.3 % | 1022.9 hPa | 0 | 0 |
| 1790642968 | 9.3 deg C | 80.6 % | 1022.8 hPa | 0 | 0 |
| 1790642068 | 9.4 deg C | 80.6 % | 1022.9 hPa | 0 | 0 |
| 1790641168 | 9.6 deg C | 80.3 % | 1023 hPa | 0 | 0 |
| 1790640268 | 9.8 deg C | 79.9 % | 1022.8 hPa | 0 | 0 |
| 1790639368 | 9.7 deg C | 80.7 % | 1022.9 hPa | 0 | 0 |
| 1790638468 | 9.8 deg C | 80.4 % | 1022.9 hPa | 0 | 0 |
| 1790637567 | 10.4 deg C | 78.3 % | 1022.8 hPa | 0 | 0 |
| 1790636667 | 10.4 deg C | 78.2 % | 1022.6 hPa | 0 | 0 |
| 1790635767 | 10.6 deg C | 77.6 % | 1022.5 hPa | 0 | 0 |
| 1790634867 | 10.8 deg C | 77 % | 1022.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)