This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790659175 | 114 Count | 961 Count | 89 Count | 4.08 VDC | 4.44 VDC |
| 1790657379 | 110 Count | 957 Count | 86 Count | 4.08 VDC | 4.44 VDC |
| 1790655579 | 106 Count | 923 Count | 83 Count | 4.08 VDC | 0 VDC |
| 1790653780 | 98 Count | 842 Count | 76 Count | 4.08 VDC | 0 VDC |
| 1790651981 | 90 Count | 738 Count | 69 Count | 4.08 VDC | 0 VDC |
| 1790650182 | 83 Count | 652 Count | 63 Count | 4.08 VDC | 0 VDC |
| 1790648383 | 76 Count | 556 Count | 57 Count | 4.08 VDC | 0 VDC |
| 1790646584 | 69 Count | 472 Count | 51 Count | 4.08 VDC | 0 VDC |
| 1790644785 | 57 Count | 389 Count | 44 Count | 4.08 VDC | 0 VDC |
| 1790642984 | 52 Count | 342 Count | 40 Count | 4.08 VDC | 0 VDC |
| 1790641186 | 47 Count | 329 Count | 36 Count | 4.08 VDC | 0 VDC |
| 1790639388 | 43 Count | 321 Count | 33 Count | 4.08 VDC | 0 VDC |
| 1790637591 | 39 Count | 316 Count | 30 Count | 4.08 VDC | 0 VDC |
| 1790635794 | 35 Count | 311 Count | 27 Count | 4.08 VDC | 0 VDC |
| 1790633998 | 31 Count | 307 Count | 24 Count | 4.08 VDC | 0 VDC |
| 1790632201 | 27 Count | 302 Count | 21 Count | 4.08 VDC | 0 VDC |
| 1790626813 | 15 Count | 290 Count | 12 Count | 4.09 VDC | 0 VDC |
| 1790625018 | 11 Count | 287 Count | 9 Count | 4.09 VDC | 0 VDC |
| 1790623220 | 8 Count | 277 Count | 7 Count | 4.09 VDC | 0 VDC |
| 1790612427 | 180 Count | 510 Count | 146 Count | 4.1 VDC | 5.18 VDC |
| 1790610631 | 175 Count | 505 Count | 142 Count | 4.1 VDC | 5.56 VDC |
| 1790608835 | 169 Count | 499 Count | 137 Count | 4.11 VDC | 5.56 VDC |
| 1790607039 | 163 Count | 493 Count | 132 Count | 4.11 VDC | 5.56 VDC |
| 1790605244 | 155 Count | 485 Count | 125 Count | 4.11 VDC | 5.58 VDC |
| 1790603447 | 149 Count | 479 Count | 120 Count | 4.11 VDC | 5.58 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)