This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274633 | 42 | 409 | 0 | 423 | 0 |
| 1774086986 | 35 | 546 | 0 | 424 | 270 |
| 1774085184 | 34 | 538 | 0 | 423 | 269 |
| 1774083385 | 33 | 530 | 0 | 423 | 269 |
| 1774081585 | 32 | 522 | 0 | 423 | 268 |
| 1774079787 | 31 | 513 | 0 | 424 | 216 |
| 1774077987 | 30 | 493 | 0 | 423 | 216 |
| 1774076188 | 29 | 475 | 0 | 422 | 216 |
| 1774074390 | 28 | 462 | 0 | 422 | 217 |
| 1774072590 | 27 | 448 | 0 | 422 | 216 |
| 1774070791 | 26 | 434 | 0 | 421 | 217 |
| 1774068991 | 25 | 420 | 0 | 421 | 32 |
| 1774067191 | 24 | 406 | 0 | 421 | 0 |
| 1774065393 | 23 | 387 | 0 | 421 | 0 |
| 1774063595 | 22 | 374 | 0 | 422 | 0 |
| 1774061796 | 21 | 361 | 0 | 422 | 0 |
| 1774059997 | 20 | 347 | 0 | 422 | 0 |
| 1774058198 | 19 | 334 | 0 | 422 | 0 |
| 1774056399 | 18 | 312 | 0 | 422 | 0 |
| 1774054600 | 17 | 293 | 0 | 422 | 0 |
| 1774052802 | 16 | 280 | 0 | 422 | 0 |
| 1774051003 | 15 | 266 | 0 | 422 | 0 |
| 1774049204 | 14 | 252 | 0 | 422 | 0 |
| 1774047406 | 13 | 238 | 0 | 423 | 0 |
| 1774045608 | 12 | 225 | 0 | 423 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)