This is the latest recevied telemetry packets stored in our database for station/object DL4LIF-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1754107483 | 1010 hPa | 15.8 C deg | 66.7 % | 1010.2 hPa | 0 C deg |
| 1754103883 | 1010.2 hPa | 15.6 C deg | 66.7 % | 1010.3 hPa | 0 C deg |
| 1754102083 | 1010.2 hPa | 15.5 C deg | 66.8 % | 1010.3 hPa | 0 C deg |
| 1754098483 | 1010 hPa | 15.3 C deg | 65.4 % | 1010.2 hPa | 0 C deg |
| 1754093081 | 1010.1 hPa | 15.9 C deg | 64.7 % | 1010.2 hPa | 0 C deg |
| 1754089481 | 1010.2 hPa | 16.3 C deg | 63.8 % | 1010.3 hPa | 0 C deg |
| 1754087681 | 1010.1 hPa | 16.7 C deg | 63.4 % | 1010.2 hPa | 0 C deg |
| 1754085881 | 1009.9 hPa | 17.1 C deg | 63.6 % | 1010 hPa | 0 C deg |
| 1754084081 | 1009.9 hPa | 17.4 C deg | 63.8 % | 1010 hPa | 0 C deg |
| 1754082280 | 1009.8 hPa | 17.9 C deg | 62.8 % | 1009.9 hPa | 0 C deg |
| 1754080480 | 1009.7 hPa | 18.4 C deg | 63 % | 1009.8 hPa | 0 C deg |
| 1754078680 | 1009.6 hPa | 19 C deg | 63.3 % | 1009.7 hPa | 0 C deg |
| 1754075080 | 1009.5 hPa | 20.1 C deg | 64.3 % | 1009.6 hPa | 0 C deg |
| 1754073279 | 1009.3 hPa | 20.5 C deg | 65.3 % | 1009.4 hPa | 0 C deg |
| 1754071479 | 1009.1 hPa | 20.8 C deg | 65.8 % | 1009.2 hPa | 0 C deg |
| 1754067878 | 1009.1 hPa | 21.3 C deg | 66.7 % | 1009.2 hPa | 0 C deg |
| 1754062479 | 1009.2 hPa | 21.5 C deg | 67.4 % | 1009.3 hPa | 0 C deg |
| 1754055278 | 1009.4 hPa | 21.5 C deg | 67.1 % | 1009.5 hPa | 0 C deg |
| 1754046276 | 1009.5 hPa | 21.4 C deg | 66.2 % | 1009.6 hPa | 0 C deg |
| 1754035475 | 1010 hPa | 18.4 C deg | 67.3 % | 1010.2 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)