APRS Track Direct

My position About ☰

reset

VA3XLT-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1786720660	13.88 Volt	420 Pkt	81 Pcnt	70 Pkt
1786720360	13.88 Volt	410 Pkt	81 Pcnt	65 Pkt
1786720060	13.88 Volt	400 Pkt	82 Pcnt	73 Pkt
1786719760	13.88 Volt	410 Pkt	84 Pcnt	75 Pkt
1786719460	13.88 Volt	420 Pkt	81 Pcnt	63 Pkt
1786719160	13.88 Volt	440 Pkt	77 Pcnt	60 Pkt
1786718860	13.88 Volt	460 Pkt	75 Pcnt	57 Pkt
1786718560	13.88 Volt	480 Pkt	73 Pcnt	60 Pkt
1786718260	13.88 Volt	490 Pkt	70 Pcnt	54 Pkt
1786717960	13.88 Volt	500 Pkt	68 Pcnt	64 Pkt
1786717660	13.88 Volt	520 Pkt	67 Pcnt	67 Pkt
1786717360	13.88 Volt	540 Pkt	65 Pcnt	55 Pkt
1786717060	13.88 Volt	540 Pkt	63 Pcnt	57 Pkt
1786716760	13.88 Volt	550 Pkt	62 Pcnt	74 Pkt
1786716460	13.88 Volt	540 Pkt	60 Pcnt	88 Pkt
1786716160	13.88 Volt	540 Pkt	58 Pcnt	104 Pkt
1786715860	13.88 Volt	530 Pkt	57 Pcnt	104 Pkt
1786715560	13.88 Volt	510 Pkt	56 Pcnt	90 Pkt
1786715260	13.88 Volt	500 Pkt	55 Pcnt	83 Pkt
1786714960	13.88 Volt	490 Pkt	56 Pcnt	75 Pkt
1786714660	13.88 Volt	490 Pkt	57 Pcnt	87 Pkt
1786714360	13.88 Volt	480 Pkt	58 Pcnt	103 Pkt
1786714060	13.88 Volt	470 Pkt	56 Pcnt	78 Pkt
1786713760	13.88 Volt	450 Pkt	56 Pcnt	68 Pkt
1786713460	13.88 Volt	460 Pkt	57 Pcnt	49 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)