This is the latest recevied telemetry packets stored in our database for station/object AH6GR-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766304500 | 376 | 0 | 0 | 0 | 0 |
| 1766302705 | 367 | 0 | 0 | 0 | 0 |
| 1766300910 | 372 | 0 | 0 | 0 | 0 |
| 1766299115 | 367 | 0 | 0 | 0 | 0 |
| 1766297320 | 364 | 0 | 0 | 0 | 0 |
| 1766295524 | 369 | 0 | 0 | 0 | 0 |
| 1766293729 | 372 | 0 | 0 | 0 | 0 |
| 1766291934 | 362 | 0 | 0 | 0 | 0 |
| 1766290138 | 369 | 0 | 0 | 0 | 0 |
| 1766288343 | 358 | 0 | 0 | 0 | 0 |
| 1766286547 | 361 | 0 | 0 | 0 | 0 |
| 1766284752 | 360 | 0 | 0 | 0 | 0 |
| 1766282957 | 362 | 0 | 0 | 0 | 0 |
| 1766281161 | 362 | 0 | 0 | 0 | 0 |
| 1766279365 | 342 | 0 | 0 | 0 | 0 |
| 1766277569 | 338 | 0 | 0 | 0 | 0 |
| 1766275773 | 408 | 0 | 0 | 0 | 0 |
| 1766275737 | 414 | 0 | 0 | 0 | 0 |
| 1766275709 | 403 | 0 | 0 | 0 | 0 |
| 1766275458 | 403 | 0 | 0 | 0 | 0 |
| 1766275419 | 403 | 0 | 0 | 0 | 0 |
| 1766275393 | 405 | 0 | 0 | 0 | 0 |
| 1766275365 | 372 | 0 | 0 | 0 | 0 |
| 1766275213 | 419 | 0 | 0 | 0 | 0 |
| 1766275204 | 411 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)