APRS Track Direct

My position About ☰

reset

OH7BD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH7BD. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786733943	12.68 Volt	30 Pkt	840 Pkt	84 Pcnt
1786730343	12.83 Volt	40 Pkt	780 Pkt	78 Pcnt
1786729143	12.83 Volt	40 Pkt	840 Pkt	84 Pcnt
1786726743	12.9 Volt	40 Pkt	600 Pkt	60 Pcnt
1786723143	12.83 Volt	80 Pkt	680 Pkt	68 Pcnt
1786719543	12.75 Volt	30 Pkt	440 Pkt	44 Pcnt
1786715943	12.75 Volt	10 Pkt	500 Pkt	50 Pcnt
1786712343	12.68 Volt	10 Pkt	570 Pkt	57 Pcnt
1786708743	13.88 Volt	10 Pkt	480 Pkt	48 Pcnt
1786705144	12.9 Volt	10 Pkt	570 Pkt	57 Pcnt
1786705143	12.9 Volt	10 Pkt	570 Pkt	57 Pcnt
1786701543	13.65 Volt	10 Pkt	650 Pkt	65 Pcnt
1786697943	12.68 Volt	30 Pkt	750 Pkt	75 Pcnt
1786694343	12.68 Volt	70 Pkt	700 Pkt	70 Pcnt
1786690743	13.65 Volt	90 Pkt	870 Pkt	87 Pcnt
1786687144	13.28 Volt	70 Pkt	650 Pkt	65 Pcnt
1786683544	12.53 Volt	60 Pkt	850 Pkt	85 Pcnt
1786681144	12.53 Volt	50 Pkt	800 Pkt	80 Pcnt
1786679944	12.6 Volt	60 Pkt	870 Pkt	87 Pcnt
1786676344	13.8 Volt	40 Pkt	850 Pkt	85 Pcnt
1786672744	12.75 Volt	40 Pkt	830 Pkt	83 Pcnt
1786669144	12.68 Volt	40 Pkt	820 Pkt	82 Pcnt
1786665544	12.68 Volt	30 Pkt	810 Pkt	81 Pcnt
1786661944	12.68 Volt	30 Pkt	900 Pkt	90 Pcnt
1786658344	12.75 Volt	30 Pkt	880 Pkt	88 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)