APRS Track Direct

My position About ☰

reset

OZ9DIJ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ9DIJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1774118222	13.8 Volt	590 Pkt	140 Pkt	78 Pcnt
1774116119	13.8 Volt	550 Pkt	150 Pkt	73 Pcnt
1774114016	13.8 Volt	420 Pkt	130 Pkt	71 Pcnt
1774111916	13.8 Volt	420 Pkt	130 Pkt	66 Pcnt
1774109813	13.8 Volt	520 Pkt	140 Pkt	70 Pcnt
1774107711	13.8 Volt	510 Pkt	140 Pkt	72 Pcnt
1774105609	13.8 Volt	510 Pkt	160 Pkt	74 Pcnt
1774103510	13.8 Volt	630 Pkt	180 Pkt	77 Pcnt
1774101405	13.8 Volt	650 Pkt	190 Pkt	77 Pcnt
1774099304	13.8 Volt	720 Pkt	190 Pkt	79 Pcnt
1774097202	13.8 Volt	760 Pkt	190 Pkt	75 Pcnt
1774095099	13.8 Volt	780 Pkt	190 Pkt	77 Pcnt
1774092997	13.8 Volt	890 Pkt	210 Pkt	79 Pcnt
1774090896	13.8 Volt	960 Pkt	200 Pkt	81 Pcnt
1774088794	13.8 Volt	990 Pkt	190 Pkt	82 Pcnt
1774086697	13.8 Volt	890 Pkt	190 Pkt	79 Pcnt
1774084589	13.8 Volt	890 Pkt	180 Pkt	76 Pcnt
1774082488	13.8 Volt	820 Pkt	170 Pkt	76 Pcnt
1774080388	13.8 Volt	820 Pkt	160 Pkt	76 Pcnt
1774078286	13.8 Volt	860 Pkt	180 Pkt	80 Pcnt
1774076183	13.8 Volt	840 Pkt	210 Pkt	83 Pcnt
1774074090	13.8 Volt	810 Pkt	230 Pkt	79 Pcnt
1774071988	13.8 Volt	630 Pkt	160 Pkt	72 Pcnt
1774069876	13.8 Volt	510 Pkt	130 Pkt	70 Pcnt
1774067773	13.8 Volt	570 Pkt	140 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)