This is the latest recevied telemetry packets stored in our database for station/object EA2ESA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | WiFiQuality* | RFQuality* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779772154 | 35 % | 49 status | 70 status | 0 | 0 |
| 1779771552 | 35 % | 49 status | 69 status | 0 | 0 |
| 1779770951 | 35 % | 47 status | 70 status | 0 | 0 |
| 1779770350 | 35 % | 47 status | 70 status | 0 | 0 |
| 1779769750 | 35 % | 51 status | 70 status | 0 | 0 |
| 1779769149 | 35 % | 51 status | 70 status | 0 | 0 |
| 1779768548 | 35 % | 48 status | 69 status | 0 | 0 |
| 1779767947 | 35 % | 48 status | 69 status | 0 | 0 |
| 1779767345 | 35 % | 46 status | 69 status | 0 | 0 |
| 1779766745 | 35 % | 50 status | 69 status | 0 | 0 |
| 1779766144 | 35 % | 48 status | 69 status | 0 | 0 |
| 1779765543 | 35 % | 51 status | 69 status | 0 | 0 |
| 1779764943 | 35 % | 51 status | 69 status | 0 | 0 |
| 1779764342 | 35 % | 50 status | 68 status | 0 | 0 |
| 1779763741 | 35 % | 50 status | 68 status | 0 | 0 |
| 1779763140 | 35 % | 50 status | 68 status | 0 | 0 |
| 1779762539 | 35 % | 48 status | 68 status | 0 | 0 |
| 1779761939 | 35 % | 50 status | 68 status | 0 | 0 |
| 1779761338 | 35 % | 48 status | 68 status | 0 | 0 |
| 1779760737 | 35 % | 51 status | 68 status | 0 | 0 |
| 1779760136 | 35 % | 49 status | 68 status | 0 | 0 |
| 1779759536 | 35 % | 49 status | 68 status | 0 | 0 |
| 1779758935 | 35 % | 50 status | 68 status | 0 | 0 |
| 1779758334 | 35 % | 48 status | 68 status | 0 | 0 |
| 1779757733 | 35 % | 50 status | 68 status | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
WiFiQuality: 0, 1, 0
RFQuality: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)