This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794908470 | 0 | 7 | 0 | 423 | 256 |
| 1794906667 | 32 | 1004 | 0 | 421 | 255 |
| 1794904867 | 31 | 995 | 0 | 421 | 255 |
| 1794903066 | 30 | 987 | 0 | 422 | 209 |
| 1794901267 | 29 | 969 | 0 | 422 | 208 |
| 1794899468 | 28 | 946 | 0 | 421 | 209 |
| 1794897668 | 27 | 915 | 0 | 421 | 100 |
| 1794895868 | 26 | 858 | 0 | 421 | 51 |
| 1794894070 | 25 | 826 | 0 | 421 | 16 |
| 1794892270 | 24 | 795 | 0 | 421 | 16 |
| 1794890471 | 23 | 771 | 0 | 421 | 16 |
| 1794888672 | 22 | 748 | 0 | 421 | 16 |
| 1794886873 | 21 | 724 | 0 | 421 | 16 |
| 1794885073 | 20 | 692 | 0 | 421 | 16 |
| 1794883273 | 19 | 662 | 0 | 422 | 16 |
| 1794881474 | 18 | 623 | 0 | 422 | 16 |
| 1794879674 | 17 | 583 | 0 | 422 | 16 |
| 1794877875 | 16 | 554 | 0 | 422 | 16 |
| 1794876074 | 15 | 523 | 0 | 422 | 16 |
| 1794874275 | 14 | 474 | 0 | 422 | 16 |
| 1794872476 | 13 | 444 | 0 | 422 | 16 |
| 1794870676 | 12 | 410 | 0 | 422 | 16 |
| 1794868876 | 11 | 384 | 0 | 423 | 16 |
| 1794867078 | 10 | 355 | 0 | 423 | 16 |
| 1794865278 | 9 | 324 | 0 | 423 | 16 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)