This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766119099 | 590 Count | 849 Count | 453 Count | 4.29 VDC | 0.14 VDC |
| 1766117298 | 583 Count | 824 Count | 447 Count | 4.24 VDC | 0.14 VDC |
| 1766115493 | 580 Count | 819 Count | 445 Count | 4.29 VDC | 0.14 VDC |
| 1766113690 | 577 Count | 814 Count | 443 Count | 4.29 VDC | 0.14 VDC |
| 1766111888 | 574 Count | 809 Count | 441 Count | 4.23 VDC | 0.14 VDC |
| 1766108282 | 568 Count | 799 Count | 437 Count | 4.31 VDC | 0.14 VDC |
| 1766106479 | 565 Count | 794 Count | 435 Count | 4.23 VDC | 0.14 VDC |
| 1766104676 | 562 Count | 789 Count | 433 Count | 4.31 VDC | 0.14 VDC |
| 1766102873 | 559 Count | 784 Count | 431 Count | 4.26 VDC | 0.14 VDC |
| 1766101071 | 556 Count | 779 Count | 429 Count | 4.26 VDC | 0.14 VDC |
| 1766099301 | 553 Count | 774 Count | 427 Count | 4.3 VDC | 0.14 VDC |
| 1766097499 | 550 Count | 769 Count | 425 Count | 4.26 VDC | 0.14 VDC |
| 1766095696 | 547 Count | 764 Count | 423 Count | 4.28 VDC | 0.14 VDC |
| 1766093893 | 542 Count | 755 Count | 419 Count | 4.25 VDC | 0.14 VDC |
| 1766092090 | 537 Count | 746 Count | 415 Count | 4.28 VDC | 0.14 VDC |
| 1766090287 | 532 Count | 737 Count | 411 Count | 4.28 VDC | 0.14 VDC |
| 1766088485 | 526 Count | 726 Count | 406 Count | 4.28 VDC | 0.14 VDC |
| 1766086682 | 519 Count | 713 Count | 400 Count | 4.24 VDC | 0.14 VDC |
| 1766084879 | 513 Count | 705 Count | 395 Count | 4.29 VDC | 0.14 VDC |
| 1766083076 | 507 Count | 699 Count | 390 Count | 4.26 VDC | 0.14 VDC |
| 1766081273 | 502 Count | 694 Count | 386 Count | 4.24 VDC | 0.14 VDC |
| 1766079471 | 493 Count | 685 Count | 378 Count | 4.31 VDC | 0.14 VDC |
| 1766077698 | 456 Count | 648 Count | 342 Count | 4.25 VDC | 0.14 VDC |
| 1766075895 | 434 Count | 626 Count | 321 Count | 4.25 VDC | 0.14 VDC |
| 1766074092 | 417 Count | 609 Count | 305 Count | 4.29 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)